Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Distillation, 105°, 24/40 Joint Size
Adapter, Distillation, 105¿, 24/40 Joint Size. Distillation adapter with top outer and lower inner joints both being the same size.
Chemglass Life Sciences Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread
Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences Septum Stopper, Sleeve Type, for 5mm OD NMR Tubes, White
Septum Stopper, Sleeve Type, for 5mm OD NMR Tubes, White. Sleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn.
Chemglass Life Sciences Adapter, Inlet, 14/20 Inner Joint, 2mm Glass Stpk, Airfree, Schlenk
Adapter, Inlet, 14/20 Inner Joint, 2mm Glass Stpk, Airfree, Schlenk. Gas inlet adapter with a 2mm glass stopcock having a constant pressure retention device. Available with a choice of inner or outer standard taper joint. Top arm is 9mm O.D. medium wall tubing for use with CG-3022 septum. Overall height of the 14/20 size is approx. 95mm while the 24/40 is approx. 120mm.
Chemglass Life Sciences Adapter, Vacuum Filtration, 23mm ID Flange, #2 Pluro Stopper, 14/20 Lower Vacuum Assembly, Overall Height 110mm
Adapter, Vacuum Filtration, 23mm ID Flange, #2 Pluro Stopper, 14/20 Lower Vacuum Assembly, Overall Height 110mm. Adapter used for reduced pressure filtration with plain stem Buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.
Chemglass Life Sciences Adapter, Inlet, 24/40 Inner Joint, 86mm Height
Adapter, Inlet, 24/40 Inner Joint, 86mm Height. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has an O.D. of 10mm at the largest serration.
Cryofab Inc NON-INSULATED TRANSFER HOSE
CFUL Series Non-Insulated Transfer Hose ½” ID Stainless Steel Braided Hose Full Length Protective Armor Covering CGA 295 Female (1/2”) flare for LN2 Dewar Connection 3/8” x .035” OD Tubing Elbow 6.5” x 24” Long 10 foot length
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Straight, Male Luer Lock to Hose Barb Adapter, 1/16"" ID; 25/PK
These luer fittings are ideal for a variety of applications, including syringes or small tubing. Barbed adapters feature three styles of barbs: standard, wide-bore, and low-profile. Wide-bore barbs offer enhanced fluid flow through the fitting and are usable with any flexible tubing. Low-profile barbs are ideal for use with semi-rigid tubing, such as nylon, polyethylene, or polypropylene. Manufactured in compliance with ISO 594-1 standards, these fittings are cleaned, inspected and fully traceable. All parts meet tight dimensional tolerances for increased reliability and process purity. Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring. Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring.
Ace Glass, Inc. Adapter, giant, Ace-Thred, with 7506-10 bushing, 45/50 inner to#25 Ace-Thred
Adapter, giant, Ace-Thred, with 7506-10 bushing, 45/50 inner to#25 Ace-Thred
Chemglass Life Sciences Sleeve, PTFE, Ribbed, w/Gripping Ring, 45/50 Joint Size
Sleeve, PTFE, Ribbed, w/Gripping Ring, 45/50 Joint Size. Reusable PTFE sleeve with knurled, reinforced gripping ring for easy removal. Sleeve has reinforcement ribs on the outer surface that provide a vacuum tight seal to 1 mbar and also prevent the sleeve from sticking. Sleeve is .008in thick.
Chemglass Life Sciences Adapter, Bushing, 45/50 Lower Inner, 24/40 Top Outer
Adapter, Bushing, 45/50 Lower Inner, 24/40 Top Outer. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Chemglass Life Sciences Adapter, Flow Control, 90°, 2mm Stpk, 29/42 Inner Joint
Adapter, Flow Control, 90¿, 2mm Stpk, 29/42 Inner Joint. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Chemglass Life Sciences Stopper, Flask Length, PTFE, Size 16
Stopper, Flask Length, PTFE, Size 16. PTFE stopper for use in flask length outer joints.